Olivetti d-Color MF4003 Service Manual page 118

d-Color MF4003/MF3303
4.2.9 ADF
1. Remove the rear cover.
F.4.1.3 Rear cover
[3] [1] [2]
[1] [4]
[3]
[2]
[3] [4]
[1] [2] [3]
[4]
[1] [2]
8. To reinstall, reverse the order of removal.
4.2.10 CIS module
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Remove the ADF.
F.4.2.9 ADF
3. Remove the scanner upper cover.
F.4.1.8 Scanner upper cover
Service Manual
2. Remove the cable and ground wire from four wire saddles [1], and disconnect
3. Remove the screw [3], and remove the plate [4].
4. Remove the cable from the edge cover [1], and disconnect the connector [2].
[1]
5. Remove five screws [3], and remove the plate [4].
[3]
6. Remove the screw [1], and disconnect two connectors [2] and the flat cable [3].
7. Remove the screw [2] while lifting up the ADF [1], and remove the ADF [1].
F DISASSEMBLY/REASSEMBLY > 4. d-Color MF4003/MF3303
the connector [2].
NOTE
▪ When removing the flat cable [3], unlock the connector [4], and
remove the cable together with the connector.
F-20
Y119930-3