Olivetti d-Color MF4003 Service Manual page 62

d-Color MF4003/MF3303
Smoothing
Print/Fax output settings
Bypass print
Total page counter
Monitor print
(4) Line connecting section
NCU type
Connecting terminal
Modem
Modem sending level
DTMF sending level
Receiving sensitivity
Dialing signal
(5) Control panel section
FAX / copy / scan / box
Interruption during scanning
Interruption during recording in the FAX
mode screen
FAX start
Stop
FAX free memory display
File existence indication
Display during the FAX communications
Error display
Time display
Remote station ID display
Other operation keys
1.3 PF-P20/PF-P21
Type
Items
Name
Type
Installation
Paper feeding system
Document alignment
Paper
Items
PF-P20
Service Manual
Yes (at converting the resolution)
Yes
Possible to use as an active tray in auto selection mode.
Yes
No (copy at sending)
A-A~, line control by silicon DAA
RJ11
Matsushita MMD-5020
-10 to -15 dBm (Country spec)
-10 to -15 dBm (Country spec)
• G3 reception: up to -48 dB
• Tone reception: up to -52 dB
DP (10pps) and DTMF
Mode switching
Initial screen after power-
on
When pressing the interrupt key while scanning documents to be transmitted, INTERRUPT LED
blinks. Copy screen appears after scanning is completed.
Operations by using the interrupt key are invalid.
by using the start key.
by using the stop key.
• Possible to appoint to stop from the job list so as to stop during operations of the multi jobs.
RDH memory
• % indication on LCD during scanning, recording and stand-by.
File memory
• Display in the JOB LIST screen
In the following cases, the data Indicator (LED) on the control panel lights up.
• Upon reception of FAX
• When a document is saved in the bulletin board box, polling TX box, and memory RX user
box.
No display by LCD panel icon.
Icons are displayed on the FAX waiting screen and the FAX operation screen.
Displayed by LCD panel
Date and time displayed.
• Present time is displayed on the sub-area.
Yes
• Displayed by number display before communications
• The TSI/CSI display during communications
[Application] key: Moves to the FAX application function setting screen.
• Check Setting key: Valid
• */# button: Yes
• Help button: Yes
500-sheet paper feed cassette
Front loading type
Desk type
Paper separation by roller with pick-up mechanism
Center
Type
2
Plain paper (60 to 90 g/m (15
15/16 to 23 15/16 lb))
C PRODUCT OUTLINE > 1. PRODUCT SPECIFICATIONS
by panel key selection
• Possible to change modes during an operation of each mode.
• No mode return by the auto reset.
Screen at power off or facsimile screen.
(depending on parameter setting))
Specifications
Size
1 1 1
A4, B5, 8 / x 11, 7 / x 10 /
2 4
C-8
Capacity
500 sheets
2
Y119930-3