d-Color MF4003/MF3303
G MECHANICAL ADJUSTMENT
1. d-Color MF4003/MF3303
1.1 Adjusting CIS reading start position
1. Remove the rear cover (ADF).
F.4.1.10 Rear cover (ADF)
2. Remove the front cover (ADF).
F.4.1.9 Front cover (ADF)
[2]
[1]
[1]
[1]
[2]
[2]
[1]
[3]
8. After completing the adjustment, tighten the screw loosened in step 6.
Y119930-3
[1]
[1]
[1]
G MECHANICAL ADJUSTMENT > 1. d-Color MF4003/MF3303
3. Remove the screw [1], and remove the document feed tray [2].
4. Remove two screws [1].
5. Remove four screws [1], and evacuate the DF lower guide assy [2].
6. Loosen the screw [1].
7. Rotate the adjustment screw [1], and slide the DF CIS module assy [3] while
referring the graduation [2] to make adjustment.
G-1
Service Manual