Olivetti d-Color MF4003 Service Manual page 304

d-Color MF4003/MF3303
Setting item
• It will not be displayed when [Service Mode] -> [Billing Setting] ->
[Management Function Choice] shows that the vendor 2 is mounted.
Compulsory Memory To set whether or not to use the compulsory memory reception function.
RX • When set to "ON", the function permits selection of ON or OFF setting for
the compulsory memory reception function that allows a document when
received not to be printed automatically and, instead, to be printed through
manual operation.
Dial In To set whether or not to use the modem dial-in function.
Reject Calls To set whether or not to use the reject calls function.
(Only for Japan) • When set to "ON", the function displays the function that allows the user to
be rejected as a reject call number.
Remote Rx To set whether or not to use the remote reception function.
(Only for Japan)
Relay To set whether or not to use the relay function.
Number display To set whether or not to use the number display function.
(Only for Japan)
Scan Setting
Setting item
Frame Erasure HP To set the frame erasure size during reading.
The four edges of the original are erased by the same width.
Erases the outer lines to prevent black lines from appearing. Effective in the book
transmission.
System Function
Setting item
Fax Board Watchdog To set whether or not to enable watchdog by the fax board CPU.
• ON: Reset when hung up.
• OFF: Keeps being hung up.
Fax BOOT Rewrite on Required when a BOOT BLOCK program is upgraded or a hardware is changed. ON
ISW
Error Code Display To set the communication error code display time.
Time
Communication Setting
Setting item
Auto Rotation Send To set whether or not to rotate the Letter size original automatically for
(LT) transmission.
• ON: Transmits in the A4 width.
• OFF: Transmits in the A3 width.
Auto Rotation Send To set whether or not to rotate the A4 size original automatically for transmission.
(A4T) • ON: Transmits in the A4 width.
• OFF: Transmits in the A3 width.
Error Page To set whether to retransmit, after a communication error occurs, the document
Resending starting with the error page or all pages.
Number of Redials To set the number of redials for the error page.
(Error Page) Counted as a busy redial when the error page redial is busy.
16.5 Fax File Format
• To initialize the following data.
• All of the scan/fax documents stored in the box are erased.
• All of the boxes produced automatically by the F code are erased.
NOTE
▪ This setting is displayed only for "Line1."
<Procedure>
1. Press the Start key.
2. The Fax File Format is executed.
Service Manual
Contents
Contents
Contents
Contents
I-88
I SERVICE MODE > 16. FAX
Setting value Default setting
ON
○
OFF
ON
○
OFF
ON
○
OFF
ON
○
OFF
ON
○ (Japan)
OFF
○ (North
America and
Europe)
ON
○
OFF
Setting value Default setting
5 mm
10 mm
○
15 mm
Setting value Default setting
ON
○
OFF
OFF
○
HOLD 20 s
10 to 250 s
(Step: 10 s)
Setting value Default setting
ON
○
OFF
ON
○
OFF
Error Page
○
All Page
0 to 7 3
(Step: 1)
Y119930-3