Olivetti d-Color MF4003 Service Manual page 288

d-Color MF4003/MF3303
(4) CPU Board Check
• To check each item of the CPU board individually.
Diagnosis item
S800 Compress/ Decompression check
S800 Output image path check
LAN-IF Ping Test
<Procedure (S800 Compress/ Decompression check / S800 Output image path check)>
1. Select the desired diagnosis key. (Two or more keys can be selected.)
2. Press the Start key to start the check procedure.
3. The check result will be displayed. (OK/NG)
4. If [OK] is displayed, touch [END].
5. If [NG] is displayed, execute the Self-diag. (Full).
<Procedure (LAN-IF Ping Test)>
1. Touch he [LAN-IF Ping Test] key.
2. Select the input method according to the IP address of the destination.
3. [Input IPv4 Address] / [Input IPv6 Address]
4. Input IP address of destination with the numeric keypad or the alphabet key.
5. Press the Start key to start the check procedure.
6. When the self diagnosis procedure is completed, the result will be displayed. (OK/NG)
7. If [OK] is displayed, touch [END].
8. If [NG] is displayed, execute "TROUBLESHOOTING/ Troubleshooting when NG is displayed for Ping Test."
(5) PCIe Check
• To check each item of the PCIe Device individually.
Diagnosis item
PCIe device check
<Procedure>
1. Select the desired diagnosis key.
2. Press the Start key to start the check procedure.
3. The check result will be displayed. (OK/NG)
4. If [OK] is displayed, touch [END].
5. If [NG] is displayed, execute the Self-diag. (Full).
Service Manual
CPU board (CPUB)
CPU board (CPUB)
CPU board (CPUB), Base board (BASEB)
CPU board (CPUB)
I-72
I SERVICE MODE > 13. State Confirmation
Relevant electrical parts
Relevant electrical parts
Y119930-3