d-Color MF4003/MF3303
4. Remove the exit cover.
F.4.1.4 Exit cover
[2]
[1]
[2]
[1]
[5]
[7]
[5]
[1]
[6]
[2]
[4]
[2]
11. To reinstall, reverse the order of removal.
4.4.5 Tray 1 lift-up motor (M6)
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Remove the DC power supply.
F.4.3.4 DC power supply (DCPS)
[1]
[2]
[3]
[2]
5. To reinstall, reverse the order of removal.
4.4.6 Document main motor (M8)
1. Remove the rear cover (ADF).
F.4.1.10 Rear cover (ADF)
Y119930-3
[3]
10. Remove two screws [5] and the connector [6], and remove the toner supply
F DISASSEMBLY/REASSEMBLY > 4. d-Color MF4003/MF3303
5. Remove three screws [1], and remove the toner supply unit [2].
6. Remove the harness from the harness guide [1].
7. Remove the toner supply unit [2].
8. Remove the harness from the wire saddle [1].
9. Remove two screws [2] and the connector [3], and remove the toner supply
motor/YM [4].
motor/CK [7].
3. Disconnect the connector [1].
4. Remove three screws [2], and remove the tray 1 lift-up motor [3].
F-37
Service Manual