Olivetti d-Color MF4003 Service Manual page 275

d-Color MF4003/MF3303
11. Counter
11.1 Outline
• The counter displays the counts of various counters to allow the technical representative to check or set as necessary.
<Common procedure>
1. Call the Service Mode to the screen.
2. Touch [Counter] to show the counter menu.
3. Select the specific counter to be displayed.
4. To clear the counts of two or more counters within a group or across different groups at once, touch [Counter Reset], select the specific
counters to be cleared, and touch [END]. Two or more counters can be selected. (However, the [service call], [Service Total], [Jam], and
[Detail code history] counters cannot be selected.)
11.2 Life
• To check the number of hours or times each of the different maintenance parts has been used.
• To clear the count of each counter.
• To perform New Release in fusing unit and transfer belt unit.
• To check how many times maintenance parts have been used.
• When each of the maintenance parts is replaced.
<Count method of each life counter>
Counter item
Fusing unit press times (Total)
Fusing unit drive time (Press)
Fusing unit drive mileage (Light press)
Fusing unit drive time (Press)
Fusing unit drive time (Light press)
Fusing unit edge predetermined tmp.
accumul. time(In printing)
Fusing unit edge predetermined tmp.
accumul. time(In standby)
Fusing unit center predetermined tmp.
accumul. time(In printing)
Fusing unit center predetermined tmp.
accumul. time(In standby)
Fusing unit CD width of max. mileage
Fusing unit max. mileage from each CD
width.
Fusing Unit Rotation Time
Fusing Unit Page Count
Transfer Belt Unit Rotation Time
Transfer Belt Unit Page Count
Transfer Roller Unit
Transfer Roller Unit Rotation Time
Toner filter
Imaging Unit (C) Rotation Time
Imaging Unit (M) Rotation Time
Imaging Unit (Y) Rotation Time
Imaging Unit (K) Rotation Time
Imaging Unit (C) Page Count
Imaging Unit (M) Page Count
Imaging Unit (Y) Page Count
Imaging Unit (K) Page Count
TCR new article detection(C)
TCR new article detection(M)
TCR new article detection(Y)
TCR new article detection(K)
1st Feed Count
2nd Feed Count
Y119930-3
Counts the number of press time.
Counts the total driving distance when pressuring.
Counts the total driving distance when lightly pressuring.
Counts the total driving time when pressuring.
Count the total driving time when lightly pressuring.
Counts the total printing time when the fusing unit edge reaches the predetermined temperature.
Counts the total stand-by time when the fusing unit edge reaches the predetermined temperature.
Counts the total printing time when the fusing unit center reaches the predetermined temperature.
Counts the total stand-by time when the fusing unit center reaches the predetermined temperature.
Counts the total paper feeding distance by each paper width, and shows paper width with the
longest total paper feeding distance.
Counts the total paper feeding distance by each paper width, and shows the longest total paper
feeding distance.
Counts how many hours the Fusing unit has turned.
Counts how many sheets have been ejected. The counter of paper length increases by 1 per every
216 mm and shows the total count. For the paper with the paper length less than 216 mm, the
counter uses 216 mm as the paper length.
Counts how many hours the transfer belt unit has turned.
Counts how many sheets have been ejected. The counter of paper length increases by 1 per every
216 mm and shows the total count. For the paper with the paper length less than 216 mm, the
counter uses 216 mm as the paper length.
Counts how many sheets have been printed. The counter of paper length increases by 1 per every
216 mm and shows the total count. For the paper with the paper length less than 216 mm, the
counter uses 216 mm as the paper length.
Counts how many hours the transfer roller unit has turned.
Not used
Counts how many hours PC drum has turned.
Counts how many sheets have been printed. The counter of paper length increases by 1 per every
216 mm and shows the total count. For the paper with the paper length less than 216 mm, the
counter uses 216 mm as the paper length.
Count the number of the replacement of the toner cartridge.
Number of sheets of paper fed from tray 1.
Number of sheets of paper fed from tray 2.
I-59
I SERVICE MODE > 11. Counter
Counting method
Service Manual