Olivetti d-Color MF4003 Service Manual page 75

d-Color MF4003/MF3303
7. Set the encrypted password.
8. Save the file (iccConfig.bin).
9. Start the Data Administrator, and select the target MFP.
10. In the [Settings for multiple device] tab, click [Batch setting of IC Card Information].
11. Using [Browse], select the file saved in step 8.
12. Click [Open] and type the encrypted password set in step 7.
13. Click [Next] and select the device to be imported.
14. Click [Start] and write the file in the MFP.
15. Check that "Normal" is shown in [Status].
16. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
17. Set the authentication user.
(f) Auth Device Tool Advanced for YSoft CRv2/YSoft CRv3
NOTE
▪ If a YSoft card reader is used, when performing authentication, the default setting for the loadable driver makes the card to
be informed as an HID Prox card regardless of which type you are using. To change the card type when performing
authentication, using Auth Device Tool Advanced for YSoft CRv2/YSoft CRv3 to choose a combination of corresponding card
types to be reported to the authentication program from the following list.
Card Reader Name
KM USB Reader v2 MultiReader HF
KM USB Reader v2 Legic Advant
KM USB Reader v2 ASK FSK 125kHz
KM USB Reader v2 Mot/Ind W26
KM USB Reader v2 HID Prox
KM USB Reader v2 HID iCLASS
KM USB Reader v3 MF & Legic
KM USB Reader v3 Indala
KM USB Reader v3 MF+
• *1: The content (ID) to be read from the type A card setting differs from which to be read by using AU-201/AU-201S.
• *2: The content (ID) to be read from the HID Prox card setting differs from which to be read by using AU-201H.
• *3: The content (ID) to be read from the HID iCLASS card setting differs from which to be read by using AU-202H.
1. Install the loadable driver for the YSoft card reader
2. Start the Auth Device Tool Advanced for YSoft CRv2/YSoft CRv3.
3. Select card type.
4. Select IC card information setting file in [Export Format] and click [Export].
5. Set the encrypted password.
6. Save the file (iccConfig.bin).
7. Start the Data Administrator, and select the target MFP.
8. In the [Settings for multiple device] tab, click [Batch setting of IC Card Information].
9. Using [Browse], select the file saved in step 6.
10. Click [Open] and type the encrypted password set in step 5.
11. Click [Next] and select the device to be imported.
12. Click [Start] and write the file in the MFP.
13. Check that "Normal" is shown in [Status].
14. Turn OFF the main power switch, wait for 10 sec., then turn the switch ON.
15. Set the authentication user.
Y119930-3
Readable Card Type
Mifare
LEGIC
EM4100, EM4102, RFID 125kHz
Indala
HID Prox
HID iCLASS
LEGIC
Indala
EM4100, EM4102, RFID 125kHz
Mifare
HID Prox
HID iCLASS
to the MFP.
D-5
D SERVICE TOOL > 2. Utility tool
IC Card Information Setting (card type to
be reported)
TypeA (1) (*1)
TypeA (1) (*1)
EM4100/
EM4102/
RFID 125kHz
Indala
HID Prox (1) (*2)
HID iCLASS (1) (*3)
TypeA (1) (*1)
Indala
EM4100/
EM4102/
RFID 125kHz
TypeA (1) (*1)
HID Prox (1) (*2)
HID iCLASS (1) (*3)
Service Manual