Olivetti d-Color MF4003 Service Manual page 104

d-Color MF4003/MF3303
[2]
3. To reinstall, reverse the order of removal.
4.1.4 Exit cover
1. Remove the toner filter assy.
E.3.1.8 Replacing the toner filter
2. Remove the rear cover.
F.4.1.3 Rear cover
3. Remove the left cover.
F.4.1.2 Left cover
[1]
[1]
6. To reinstall, reverse the order of removal.
4.1.5 Control panel unit
1. Remove the control panel cover.
F.4.1.6 Control panel cover
[2]
[1]
Service Manual
[1]
[3]
[1]
[2]
F DISASSEMBLY/REASSEMBLY > 4. d-Color MF4003/MF3303
2. Remove the screw [1], and remove the rear cover [2].
4. Remove the exit cover [1].
5. NOTE
▪ When mounting the exit cover, make sure that tabs of the exit cover
are hooked firmly into the four holes [1].
▪ When mounting the exit cover, pay attention not to damage the
speaker [2] by the tabs.
▪ If the clearance [3] is wide, the tabs may not be hooked. Check the
state of the tabs.
2. Remove the screw [1], and remove the cover [2].
F-6
Y119930-3