Olivetti d-Color MF4003 Service Manual page 175

d-Color MF4003/MF3303
Key name
PCL Setting Select Color
Symbol Set
Font Settings
Font Size
Line/Page
CR/LF Mapping
Thin Line
Bar Code Font Settings
Auto Trapping
PS Setting Select Color
PS Error Print
ICC Profile Settings
Auto Trapping
Black Overprint
TIFF Setting Auto Paper Select
Security Setting Verify XPS/OOXML Digital
Signature
OOXML Print Settings Sheet/Book Print
Paper Size
Paper Type
Page Layout Settings -
4.6 Store Address
NOTE
▪ In a machine where the user authentication function that uses an external server or MFP is set to ON, when you operate the
machine without performing user authentication, this menu is not displayed.
▪ It will not be displayed is [Service Mode] -> [Billing Setting] shows that [Authentication Device2] is mounted.
Key name
Address Book E-mail Address
FTP
SMB
WebDAV
User Box
Fax
IP Address Fax
Internet Fax
Group Destination Information
Y119930-3
Function/Precondition
• It will not be displayed when [Service Mode] -> [Billing
Setting] -> [Management Function Choice] is set to
"Vendor 2."
Fax • It will be displayed when fax kit is mounted.
• It will be displayed when setting other than "Restrict" is
selected in [Administrator] -> [Security] -> [Administrator
Security Levels].
• It will not be displayed when [Service Mode] -> [Billing
Setting] -> [Management Function Choice] is set to
"Vendor 2."
-
-
-
-
Default setting value differs depending on the values set in [Utility] -> [Utility] ->
[Printer Settings] -> [Basic Setting] -> [Original Direction] and [Paper Size].
-
-
It is displayed when i-Option LK-106 is enabled.
-
-
-
Photo - RGB Color
Photo - Output Profile
Text - RGB Color
Text - Output Profile
Figure/Table/Graph - RGB Color
Figure/Table/Graph - Output Profile
Simulation Profile
-
-
When "Auto" is selected and paper larger than the image size is not in the paper
trays, paper size error occurs.
-
-
The paper size selected in [Service Mode] -> [System 1] -> [Foolscap Size Setting]
is displayed.
-
Function/Precondition
-
-
-
-
It will not be displayed when [Service Mode] -> [Billing Setting] ->
[Management Function Choice] shows that the "Vendor 2" is
mounted. (It will be displayed when the key counter is mounted.)
-
Setting will be available when [IP Address Fax Function Settings]
in [Administrator] -> [Network] -> [Network Fax Setting] is set to
"ON."
Setting will be available when [I-Fax Function Setting] in
[Administrator] -> [Network Settings] -> [Network Fax Setting] is
enabled.
-
H-7
H UTILITY MODE > 4. Utility
-
-
-
-
-
-
-
Service Manual