Olivetti d-Color MF4003 Service Manual page 396

d-Color MF4003/MF3303
5. How to install the i-Option data
5.1 Available function for i-Option
i-Option
LK-102 v3 PDF processing
LK-104 v3 Voice guidance
LK-105 v4 Searchable PDF
LK-106 Barcode font
LK-107 Unicode font
LK-108 OCR font
LK-110 v2 High functional Image Processing In the Standard firmware
LK-111 Enhancing external linkage
(supported by ThinPrint)
LK-114 Ubiquitous Printing
LK-115 v2 TPM (Trusted Platform Module)
LK-116 Virus Scan
5.2 LK-107/LK-108 font data installation procedure
1. Prepare an USB memory.
2. Copy the font data to the root directory of the USB memory.
• OCR font: download_OCRA-0.pdf
• Unicode font: download_Andale_J-0.pdf, download_Andale_K-0.pdf, download_Andale_S-0.pdf, download_Andale_T-0.pdf
3. Turn ON the main power switch, and connect the USB memory to the USB port on the side of the control panel.
4. The message "Print a document from External Memory" will be displayed on the control panel, and select it.
5. The font data in the USB memory will be displayed, and select these data to print out.
6. The message "Document Printing Failed" will be displayed, and touch [OK].
7. Print out a PCL font list, and confirm that the font data are registered as following names.
• LK-107: Andale Mono WT J, Andale Mono WT K, Andale Mono WT S, Andale Mono WT T
• LK-108: OCR-A
Service Manual
Functions
In the Standard firmware
In the Standard firmware
In the Standard firmware
In the Standard firmware
In the Standard firmware
In the Standard firmware
In the Standard firmware
In the Standard firmware
In the Standard firmware
In the Standard firmware
Data location How to install data when formatting the MFP storage
[Service Mode] -> [System 2] -> [Install Data]
n/a
LK-107/LK-108 font data installation procedure
[Service Mode] -> [System 2] -> [Install Data]
n/a
K-8
K FIRMWARE > 5. How to install the i-Option data
Y119930-3