Olivetti d-Color MF4003 Service Manual page 380

d-Color MF4003/MF3303
1. Connect the USB cable of an external HDD to the USB port of an MFP. (USB NG will be displayed when the HDD is not recognized
correctly.)
2. Call the Service Mode to the screen.
3. Call the Enhanced Security to the screen.
4. Touch [Storage Data Backup].
5. Select [Generic format Backup] or [OLI Format Backup].
6. Touch [Enter Password], enter an encryption password using 1 to 32 characters, then touch [END].
7. Touch [Start]. ("Processing" will be displayed.)
Touch [Cancel] if you want to stop the backup.
8. After completing the backup, [Result OK] will be displayed.
9. Turn OFF and ON the main power switch.
<Restore procedure>
1. Connect the USB cable of an external HDD to the USB port of an MFP.
2. Call the Service Mode to the screen.
3. Call the Enhanced Security to the screen.
4. Touch [Storage Data Backup].
5. Select [Restore].
6. Touch [Enter Password], enter a decryption password using 1 to 32 characters, then touch [END].
7. Touch [Start]. ("Processing" will be displayed.)
Touch [Cancel] if you want to stop the restore.
8. After completing the restore, [Result OK] will be displayed.
9. Turn OFF and ON the main power switch.
2.12 Data Backup
2.12.1 Client Function
• To be used for moving data at the time of MFP replacement.
• Back up data saved in an MFP to the WebDAV server or an HDD.
(1) Server Backup
Select Backup
• Select the backup method.
Setting item
Disable
Server Backup
Server Backup 2
Setting when selecting backup to the server
<Backup setting>
• Set the backup setting.
NOTE
▪ This function cannot be enabled when Transmission protocol, SMB Setting or HTTP Setting, Backup target and Encryption
Password have not been set.
Setting item
Function Setting
Transmission protocol
SMB Host Name
Setting
File Path
User Name
Password
HTTP URL
Setting
User Name
Password
Proxy
Backup target
Service Manual
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 2. ENHANCED
Select not to use the backup.
Select to make backup to the server as backup.
Set "Setting when selecting backup to the server".
Select to make backup to the server as backup 2.
Set "Setting when selecting backup 2 to the server".
To set whether to back up data to a server.
• When [ON] is selected, configure settings required for backup.
To select a Transmission protocol.
To be set when "SMB" is selected for Transmission protocol.
To be set when "HTTP" is selected for Transmission protocol.
To select a target to back up.
Items of (*) are displayed only when selected [Enable] in [Service
Mode] -> [System 2] -> [Maintenance Mode], and [Allow] in
[Administrator] -> [Security] -> [Security details] -> [Maintenance
Mode Access].
Contents
Contents
J-26
SECURITY
Setting value Default
setting
ON
Disable
SMB
HTTP
Alphanumeric characters
and symbols up to 253
characters
255 characters maximum
64 characters maximum
64 characters maximum
Alphanumeric characters
and symbols up to 253
characters
64 characters maximum
64 characters maximum
ON/Disable
Remote Access Setting
User Settings
Service setting
Address Book (*)
Y119930-3
○
○
-
-
-