Olivetti d-Color MF4003 Service Manual page 204

d-Color MF4003/MF3303
Function Name
Server load reduction Select the sending method to reduce the load of the E-
transmission method mail server (SMTP).
SNMPv1/v2c To use when changing Write setting.
SNMP v3 Security Level To set the Security level for the Reading/Writing
and auth/priv-password Authority User which is used for SNMP v3.
Print Data Capture To set whether to allow or restrict capturing the Print
Job Data.
Network Setting Clear To clear the network setting through Web Connection.
Release Time Settings To set the period of time to be elapsed before the
access lock state is released.
Destination Registration -
Change by User
(Address Book and
Program destination)
Security Print User Box -
Preview
Initialize (Network To clear the network-related settings.
Settings)
Image Log Transfer Specifies whether to transfer the input or output image
Settings data to the server using whenever machine inputs or
outputs image data.
Machine Update To set firmware upgrading by Internet ISW, and enable
Settings or disable various settings.
operation Ban release To set the period of time to be elapsed before the
time (CE Authentication) access lock state is released in CE password
authentication.
E-mail RX Print To print an E-mail attachment, send an E-mail to the E-
mail address of this machine.
IWS Settings Set the operating environment of IWS (Internal Web
Server) function.
Report File Attachment Report File Attachment
Storage data backup To set whether to permit our service representative to
back up or restore the storage on this machine.
CS Remote Care CS Remote Care enables the machine and the
computer at CS Remote Care center to exchange data
through telephone/fax line, network or E-mail in order to
control the machine.
Maintenance Mode To set whether to permit your service representative to
Access change [Administrator Settings] of a device without
authentication.
Simple Connection To set the pairing method to connect to an Android/iOS
Setting terminal.
SSL Settings (WebDAV Specify whether to use the SSL for communication or
Server Settings) not.
SSL Setting (OpenAPI Specify whether to use the SSL for communication or
Settings) not.
Web Browser Setting Select whether to enable a Web Browser.
Remote Panel Settings Configure settings for remotely controlling the Control
Panel of this machine from another computer.
Service Manual
H UTILITY MODE > 12. Supplementary explanation of utility mode
Contents
H-36
Default setting When Enhanced Security mode is set to
OFF When [Stop URL when max. limit is
exceeded] or [Always Send via URL] is
selected, this option is set to [OFF].
Read/Write Only Read is enabled (not to be changed)
enable
auth/priv- • The security level can be selected
password from among [auth-password] and
[auth/priv-password].
• An 8-digit-or-more auth-password
and priv-password can both be set.
Allow Restrict (not to be changed)
Enabled Restrict
5 min. The setting value should be 5 min. or
more (no value less than 5 can be set)
Allow Restrict (not to be changed)
Thumbnail View, Only Detail View is enabled before
Detail View, and password authentication (Mode 2)
Document
Details are
enabled
Enabled Restrict (not to be changed)
OFF OFF (not to be changed)
OFF OFF (not to be changed)
5 min. The setting value should be 5 min. or
more (no value less than 5 can be set)
OFF OFF (not to be changed)
OFF OFF (not to be changed)
With Attachment Without Attachment (not to be changed)
Restrict Restrict (not to be changed)
Usable Remote device setting disabled
Restrict Restrict (not to be changed)
QR Code OFF (not to be changed)
Display Setting:
OFF
Enable NFC: OFF (not to be changed)
OFF
Enable OFF (not to be changed)
Bluetooth LE:
OFF
Non-SSL Only SSL Only (not to be changed)
Non-SSL Only SSL Only (not to be changed)
OFF OFF
Client Settings: OFF
OFF
Server Setting: OFF
OFF
"ON"
Y119930-3