Olivetti d-Color MF4003 Service Manual page 241

d-Color MF4003/MF3303
Setting item
Connection Time-out To set the timeout period for transmission.
Authentication To set whether or not to authenticate during transmission via SMTP server.
Setting To use when authenticating during transmission.
<Making Authentication Setting>
• If "POP Before SMTP" is set in "Authentication Setting", set the time for POP Before SMTP.
0 to "60 Sec"
• If "SMTP Authentication" is set in "Authentication Setting", touch the "Setting Check" key for authentication.
Setting item
User ID Enter the user ID for SMTP authentication.
Password Enter the password for SMTP authentication.
Domain Name Enter the domain name for SMTP authentication.
TX/RX Test
• To determine the correct transmission and reception using CS Remote Care.
<Procedure>
1. Press the Start key to let the machine start the transmission and reception test.
2. The test procedure and result will be displayed on the screen.
Data Initialization
• To initialize the contents for the sever setting.
Yes
No
(2) http1 or http2 is selected
HTTP Server Settings
Setting item
URL To set an address of the http server that is used in CS Remote Care.
It can be set by the IP address or the domain name.
• Input IP Address: Input in version 4 format.
• FQDN input: Enter the domain name.
account To set an account that is used to access the http server used in CS Remote
Care.
Password To set a password that is used to access the http server used in CS Remote
Care.
Port Number To set a port number that is used to access the http server used in CS
Remote Care.
SSL Settings
• To make SSL settings of the http server at the other end that is used in CS Remote Care.
Setting value
Yes To set to use SSL communication.
No To set not to use SSL communication.
Data Initialization
• To initialize the contents for the sever setting.
Yes
No
Y119930-3
Setting range
Contents
Setting value
Contents
Contents
Setting value
Contents
I-25
I SERVICE MODE > 8. CS Remote
Setting value
30 to 300 Sec
OFF
POP Before SMTP
SMTP Authentication
Default setting
60 Sec
Setting value
Alphanumeric characters and symbols (up to
255 characters)
Alphanumeric characters and symbols (up to
128 characters)
Alphanumeric characters and symbols (up to
253 characters)
Default setting
○
Setting value
Input IP Address
[0 to 255].[0 to 255].[0
to 255].[0 to 255]
FQDN input
Alphanumeric
characters and
symbols (up to 253
characters)
Alphanumeric
characters and
symbols (up to 63
characters)
Alphanumeric
characters and
symbols (up to 63
characters)
1 to 65535
Default setting
○
Default setting
○
Default setting
60 Sec
○
Default setting
-
-
-
-
80
Service Manual