Olivetti d-Color MF4003 Service Manual page 402

d-Color MF4003/MF3303
JAM type
Misfeed at tray 3 paper Paper jam of a sheet of paper left at the tray 3 paper feed section results, if
feed section (When PF-P20 the tray 3 transport sensor (PS6/3) is turned ON (unblocked) when the main
or PF-P21 is installed) power switch is turned ON, a door is opened and closed, or a misfeed or
malfunction is reset.
Paper jam of a sheet of paper left at the tray 3 paper feed section results, if a
sheet of paper is determined to exist at a position detected when the main
power switch is turned ON, a door is opened and closed, or a misfeed or
malfunction is reset.
Misfeed at vertical transport Paper jam of a sheet of paper left at the vertical transport section results, if a
section (When PF-P20 or sheet of paper is determined to exist at a position detected when the main
PF-P21 is installed) power switch is turned ON, a door is opened and closed, or a misfeed or
malfunction is reset.
Misfeed at 2nd transfer Paper jam of a sheet of paper left at the 2nd transfer section results, if the
section registration sensor (PS9) is turned ON (blocked) when the main power switch
is turned ON, a door is opened and closed, or a misfeed or malfunction is
reset.
Paper jam of a sheet of paper left at the 2nd transfer section results, if the
fusing loop sensor (PS10) is turned ON (blocked) when the main power switch
is turned ON, a door is opened and closed, or a misfeed or malfunction is
reset.
Paper jam of a sheet of paper left at the 2nd transfer section results, if a sheet
of paper is determined to exist at a position detected when the main power
switch is turned ON, a door is opened and closed, or a misfeed or malfunction
is reset.
Misfeed at paper exit Paper jam of a sheet of paper left at the paper exit section results, if the paper
section exit sensor (PS13) is turned ON (unblocked) when the main power switch is
turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
Paper jam of a sheet of paper left at the paper exit section results, if a sheet of
paper is determined to exist at a position detected when the main power
switch is turned ON, a door is opened and closed, or a misfeed or malfunction
is reset.
Misfeed at DF document Paper jam of a sheet of paper left at the DF document feed section results, if
feed section the after separate sensor (PS16) is turned ON when the main power switch is
turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
Misfeed at DF document Paper jam of a sheet of paper left at the DF document transport section
transport section results, if the document registration sensor (PS17) is turned ON (unblocked)
when the main power switch is turned ON, a door is opened and closed, or a
misfeed or malfunction is reset.
Misfeed at DF document Paper jam of a sheet of paper left at the DF document reading results, if the
reading section document before read sensor (PS18) is turned ON when the main power
switch is turned ON, a door is opened and closed, or a misfeed or malfunction
is reset.
Misfeed at duplex pre- Paper jam of a sheet of paper left at the duplex pre-registration section
registration section results, if a sheet of paper is determined to exist at a position detected when
the main power switch is turned ON, a door is opened and closed, or a
misfeed or malfunction is reset.
Misfeed at duplex transport Paper jam of a sheet of paper left at the duplex transport section results, if the
section ADU transport sensor (PS11) is turned ON (unblocked) when the main power
switch is turned ON, a door is opened and closed, or a misfeed or malfunction
is reset.
Paper jam of a sheet of paper left at the duplex transport section results, if a
sheet of paper is determined to exist at a position detected when the main
power switch is turned ON, a door is opened and closed, or a misfeed or
malfunction is reset.
1.5 1#-##
1.5.1 10-01, 10-02, 10-40
Contents
JAM type Misfeed at manual bypass paper feed section
JAM code 10-01, 10-02, 10-40
JAM detection timing
Service Manual
JAM detection timing
10-01 The leading edge of the paper is not turned ON (blocked) the registration sensor (PS9) even after
the lapse of a given period of time after the manual bypass tray starts to feed paper.
10-02 For paper fed from the manual bypass tray, loop forming has not been complete before a sheet
enters the registration roller because the rise timing of load to perform registration is earlier than the
rise timing of load to form a loop.
10-40 For paper fed from the manual bypass tray, the image write start signal permit continues to be
disabled for a predetermined period of time after the timing of the image write start signal output.
L-4
L TROUBLESHOOTING > 1. JAM CODE
Ref. page
L.1.5.4 13-01, 13-40
L.1.6.1 20-02, 20-10, 20-11, 20-12,
20-21, 20-26
L.1.7.1 30-01, 30-03
L.1.7.2 32-05, 32-06, 32-31
L.1.8.1 66-02
L.1.8.2 66-13, 66-33
L.1.8.3 66-05
L.1.9.1 92-01, 92-02, 92-03, 92-04
L.1.9.2 93-03
Y119930-3