Olivetti d-Color MF4003 Service Manual page 190

d-Color MF4003/MF3303
Key name
Network I/F Configuration (*1)
Wireless Network Setting (*1)
Domain Send Operation
Restriction Setting
HTTP Server Settings
MAC Address
Network Settings List
Awake from ErP
• *1: It will be displayed when optional wireless LAN devices are mounted.
6.7 Box
NOTE
▪ In a machine where the user authentication function that uses an external server or MFP is set to ON, when you operate the
machine without performing user authentication, this menu is not displayed.
▪ It will not be displayed is [Service Mode] -> [Billing Setting] shows that [Authentication Device2] is mounted.
Key name
User Box List
System User Box List
6.8 Printer Settings
Key name
Basic Setting Print/Fax Output
Service Manual
For details of the functions, refer to "
For details of the functions, refer to "
-
• It will not be displayed when [Service Mode] -> [Billing Setting] shows that [Authentication Device2] is
mounted.
• To use the Web Connection, enable "JavaScript" and "Cookie" of the Web browser. If this machine is
connected to the internet via a proxy server, register the Proxy Settings of the Web browser as
"Exceptions." When the Web Connection is not displayed properly even if the above settings have been
conducted, delete the cache of the Web browser.
-
-
-
New Create User Box (Public/
Registration Personal)
New Bulletin Board User Box
Registration
Relay User Box
Annotation User Box
Function/Precondition
H.12.5.4 Network I/F
H.12.5.5 Wireless Network
Function/Precondition
• It will not be displayed when [Service Mode] -> [Billing
Setting] -> [Management Function Choice] is set to "Vendor
2." (It will be displayed when the key counter is mounted.)
• It will not be displayed due to functional restriction upon user
authentication when [User Box] is set to "Restrict."
• It will not be displayed when [Administrator] -> [System
Settings] -> [User Box Setting] -> [Allow/Restrict User Box] is
set to "OFF."
• It will be displayed when fax kit is mounted.
• It will not be displayed when [Service Mode] -> [Billing
Setting] -> [Management Function Choice] is set to "Vendor
2." (It will be displayed when the key counter is mounted.)
• It will not be displayed due to functional restriction upon user
authentication when [User Box] is set to "Restrict."
• It will not be displayed when [Administrator] -> [System
Settings] -> [User Box Setting] -> [Allow/Restrict User Box] is
set to "OFF."
• It will not be displayed due to functional restriction upon user
authentication when [Fax] is set to "Restrict."
• It will be displayed when fax kit is mounted.
• It will be displayed when [Service Mode] -> [FAX] -> [System]
-> [Display Setting] -> [Relay] is set to "ON."
• It will not be displayed when [Service Mode] -> [Billing
Setting] -> [Management Function Choice] is set to "Vendor
2." (It will be displayed when the key counter is mounted.)
• It will not be displayed due to functional restriction upon user
authentication when [User Box] is set to "Restrict."
• It will not be displayed when [Administrator] -> [System
Settings] -> [User Box Setting] -> [Allow/Restrict User Box] is
set to "OFF."
• It will be displayed when fax kit is mounted.
• It will not be displayed when [Service Mode] -> [Billing
Setting] -> [Management Function Choice] is set to "Vendor
2." (It will be displayed when the key counter is mounted.)
• It will not be displayed due to functional restriction upon user
authentication when [User Box] is set to "Restrict."
• It will not be displayed when [Administrator] -> [System
Settings] -> [User Box Setting] -> [Allow/Restrict User Box] is
set to "OFF."
• When conducting user authentication, it will be displayed
when the administrator authentication is complete.
Function/Precondition
Print It will not be displayed when [Service Mode] -> [Billing Setting]
-> [Management Function Choice] shows that the "Vendor 2" is
mounted.
H-22
H UTILITY MODE > 6. Administrator
Configuration."
Setting."
Y119930-3