Olivetti d-Color MF4003 Service Manual page 143

d-Color MF4003/MF3303
[3] [2]
[2] [1]
8. To reinstall, reverse the order of removal.
4.6.2 Toner suction fan (FM2)
1. Remove the toner filter assy.
E.3.1.8 Replacing the toner filter
2. Remove the rear cover.
F.4.1.3 Rear cover
3. Remove the left cover.
F.4.1.2 Left cover
4. Remove the PWB box.
F.4.2.7 PWB box
[3]
[2]
[2]
[3] [1]
9. To reinstall, reverse the order of removal.
4.6.3 DF cooling fan motor (FM4)
1. Remove the rear cover (ADF).
F.4.1.10 Rear cover (ADF)
[2]
[1]
Y119930-3
6. Remove the harness from the harness guide [1].
7. Remove two screws [2], and remove the machine cooling fan [3].
5. Disconnect the connector [1].
[2]
6. Remove three screws [2], and remove the toner suction fan assy [3].
[1]
7. Remove the harness from the harness guide [1].
8. Remove two screws [2], and remove the toner suction fan [3].
2. Remove the harness from the wire saddle [1], and slide out the DF cooling fan
F DISASSEMBLY/REASSEMBLY > 4. d-Color MF4003/MF3303
motor [2].
F-45
Service Manual