Olivetti d-Color MF4003 Service Manual page 242

d-Color MF4003/MF3303
8.1.9 Product Auth. Settings
Product Authentication
• To set whether or not to enable product authentication.
NOTE
▪ When changing this setting under the condition where http is used for CS Remote Care communication, you need to perform
RAM Clear and then initial transmission again.
Yes
No
WebDAV
• To set a WebDAV server for the product authentication.
Setting item
URL
account
Password
Port Number
Register Manually
• To install the certificate to be used in product authentication.
<Procedure (LMS)>
1. Touch [Register Manually] -> [LMS].
2. Touch [Start] to communicate with LMS (License Management System) and install the certificate.
3. Check that the "Install OK" message appears.
<Procedure (USB)>
NOTE
▪ In the following conditions, installation of the certificate from a USB memory is prohibited.
▪ [Administrator] -> [Security] -> [USB Connection Permission setting] is set to [Restrict].
▪ [Administrator] -> [Security] -> [USB Connection Permission setting] -> [Detail Setting] -> [External Memory(Service)] is set
to [Restrict].
▪ [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON".
1. Connect the USB flash drive where the certificate obtained from LMS (License Management System) is stored to the USB port of MFP.
2. Touch [Register Manually] -> [USB].
3. Touch [Start] to install the certificate.
4. Check that the "Install OK" message appears.
8.1.10 Import/Export Settings
WebDAV Setting
• To configure WebDAV server settings used to remotely export or import MFP data (address book data, authentication setting data).
Setting item
URL
Folder Name
Account
Password
Port Number
• To set a port number that is used to access the WebDAV server.
• Enter the port number using the 10-key pad.
SSL Settings
• To configure the WebDAV server's SSL settings.
Yes
No
Data Initialization
• To initialize the settings on the server.
Yes
No
8.1.11 Auto Initial Dial Setting
• To set whether to configure the Auto Initial Dial Setting for each CSRC communication method.
• Execute the CSRC Auto Initial Dial automatically at the first time of startup after importing [Remote Access Settings] from [Machine Import
Setting].
NOTE
▪ This function is enabled only when "Set" is selected and the following conditions are satisfied.
▪ No registrations to the CSRC server have been made.
Service Manual
Setting value
Set the address of the WebDAV server.
To set an account that is used to access the WebDAV server.
Set the password that is used to access the WebDAV server.
Set the port number that is used to access the WebDAV server.
To set the address of the WebDAV server.
To set a folder name of the WebDAV server that is used to transfer data.
To set an account that is used to access the WebDAV server.
Set the password that is used to access the WebDAV server.
Setting value
Setting value
Contents
Contents
I-26
I SERVICE MODE > 8. CS Remote
Default setting
○
Default setting
○
Default setting
○
Y119930-3