Olivetti d-Color MF4003 Service Manual page 264

d-Color MF4003/MF3303
HEX 10
• Setting for allowing/prohibiting billing on exited paper when a paper size error occurred at the time of duplex printing
Bit Assignment
00000000
00010000
10.5.15 SW No.147
• Set whether allow or prohibit use of Archive Paper Enable.
Bit Assignment
00000000
00001000
10.5.16 SW No.151
• Setting for displaying/hiding the Near Empty Display Time
Bit Assignment
00000000
00000010
Reference
• [Service Mode] -> [System 2] -> [Unit Change]
10.5.17 SW No.152
• The E-mail body print settings of E-Mail RX Print
Bit Assignment
00000000
00000001
• This function supports the following languages.
• Japanese, English, French, Italian, Germany, Spanish
10.5.18 SW No.155
• Validation/invalidation of the debug setting of the log.
Bit Assignment
00000000
00000001
Reference
• [Service Mode] -> [Debug Settings] -> [Basic mode]
10.5.19 SW No.157
• Change the upper limit of the time for switching to power save mode.
Bit Assignment
00000000
00000010
Reference
• [Administrator] -> [Maintenance] -> [Timer Setting] -> [Power Settings] -> [Low Power Mode Setting]
10.5.20 SW No.163
• Setting for the auto execution of Self-diag.(Full)
Bit Assignment
00000000
00000010
10.5.21 SW No.172
• MarketPlace Client App install settings.
Bit Assignment
00000101
00000001
NOTE
▪ The installed MarketPlace Client App is not uninstalled even if it is changed to 0x01.
Service Manual
HEX Assignment
00 Stops
10 Outputs paper.
HEX Assignment
00 Not to use Archive Paper.
08 Use Archive Paper.
HEX Assignment
00 Hide
02 Display
HEX Assignment
00 Disables the E-mail body print settings.
01 Allows the E-mail body print settings.
HEX Assignment
00 Debug setting is disabled.
01 Debug setting is enabled.
HEX Assignment
00 Do not change the upper limit.
02 Change the upper limit to 240 minutes.
HEX Assignment
00 Disable
02 Enable
The Self-diag. (Full) will be executed automatically only
when the rank B/C trouble codes are detected.
HEX Assignment
05 At the time of installation, the MarketPlace Client App is
installed automatically.
01 At the time of installation, the MarketPlace Client App is not
installed automatically.
Details
Details
Details
Details
Details
Details
Details
Details
I-48
I SERVICE MODE > 10. System 2
Default value (Bit/HEX)
00010000 / 10
Default value (Bit/HEX)
00000000 / 00
Default value (Bit/HEX)
00000010 / 02
Default value (Bit/HEX)
00000000 / 00
Default value (Bit/HEX)
00000000 / 00
Default value (Bit/HEX)
00000000 / 00
Default value (Bit/HEX)
00000010 / 02
Default value (Bit/HEX)
00000101 / 05
(Except for Japan)
00000001 / 01
(Japan)
Y119930-3