Olivetti d-Color MF4003 Service Manual page 487

d-Color MF4003/MF3303
Error code
1061 Modifying not allowed
• The host sent a command mail that asked modifying data of item
where setting change is not allowed.
1062 Modifying not available due to the copy job currently performing
• When informing the host that it cannot be modified due to the
copy job currently performing.
1080 Data length problem
• LEN value of TEXT data and actual data length are not
consistent.
1081 Frame No. error
• The last frame has not been received.
• There are missing frame No.
1082 Subject Type problem
• Received code did not define the Type of Subject.
1084 Date expired
• Expiration date for data modification command has passed.
1091 Oversized command
• Received attached file exceeds the machine's receive buffer
size.
1092 Received an error mail when center setup is not complete
1099 Illegal request
• Status not predicted in design is detected.
(3) 2###
Error code
2064 Network is down
• LAN cable on main body side is detached.
206B Communication from an MFP to the server is disabled due to
problems on the server side
• LAN cable on the copier side is detached.
203E Connection timeout
(4) 3###
Error code
3001 POP3_AUTHORIZATION_ERR
3002 POP3_TRANSACTION_ERR
3003 POP3_CONNECT_ERR
3004 POP3_TIMEOUT_ERR
3005 POP3_FORMAT_ERR
3006 POP3_MEMORY_ERR
3007 POP3_JOBID_ERR
3008 POP3_NO_DATA_ERR
3009 POP3_DELETE_FAIL_ERR
3010 POP3_MAILBOX_FULL
(5) 4###
Error code
4103 During polling from main body, MIO is not active and MFP cannot
start communication.
4104 During e-mail transmission from main body to the center, the SMTP
channel is not in the "Ready" status and main body cannot send e-
mail.
4105 During polling from main body, the POP3 channel is not in the
"Ready" status and main body cannot receive e-mail.
4106 During e-mail transmission from main body to the center, MIO is not
active and MFP cannot start communication.
41F9 Control error
• In the CS Remote Care's internal sequence, message transfer
failed.
41FA Control error
Y119930-3
Contents
Contents
Contents
Contents
L-89
L TROUBLESHOOTING > 7. CS Remote Care ERROR CODE
Ask the host to send another instruction mail for
modifying.
Ask the host to send another instruction mail for
modifying.
Ask the host to send another instruction mail for
modifying.
Check the status of the machine registration on host
side, and perform initial transmission as necessary.
Ask the host to send another instruction mail for
modifying.
Ask the host to send another instruction mail for
modifying.
Ask the host to send another instruction mail for
modifying.
Check the status of the machine registration on host
side.
Check the status of the machine registration on host
side, and perform initial transmission as necessary.
• Check the connection between main body on
the user's side and the network connector.
• Check the network environment on the user's
side.
• Check the connection between main body on
the user's side and the network connector.
• Check the network environment on the user's
side.
Check timeout setting.
Check the user's POP3 server system settings.
• Authentication setting
• Connection ID
• Password
• Address of the destination where the server is
connected
Wait for a while and try transmitting again.
Wait for a while and try transmitting again.
Wait for a while and try transmitting again.
Wait for a while and try transmitting again.
Turn the main power switch OFF and then ON.
Turn the main power switch OFF and then ON.
Solution
Solution
Solution
Solution
Service Manual