Olivetti d-Color MF4003 Service Manual page 185

d-Color MF4003/MF3303
Key name
Quick Security Setting
USB Connection Permission
setting
Enhanced Security Mode
Function Management Settings Maximum Job
Stamp Settings
FW Update (USB) Permission
Setting
Image Log Transfer Settings
Driver Password Encryption
Setting
FIPS Settings
TPM Setting
Job Log Settings
OpenAPI Certification
Management Setting
Y119930-3
Confidential Document It cannot be changed at the operator's option since it will automatically be set
Access Method according to the [ProhibitFunctions] setting.
• It will be set to "Mode 1" when [ProhibitFunctions] is set to "Mode1."
• It will be set to "Mode 2" when [ProhibitFunctions] is set to "Mode2."
Manual Destination -
Input
Print Data Capture • To be used when carrying out [Service Mode] -> [System 2] -> [Data Capture].
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON,"
Restrict Fax TX -
Address Selection It will be displayed when [Administrator] -> [Security] -> [Restrict User Access] ->
Confirmation Display [Multiple Addresses Restriction Setting] is set to "OFF."
Personal Data Security -
Settings
Initialize -
Secure Print Only -
Web browser contents • It will be displayed when an extended function of the web browser via OpenAPI
access
• When using the application where server authentication is carried out by web
Export Debug Log • This is displayed when Switch No. "155" is set to "01" in HEX Assignment in
• Use: To select whether or not allow CE to export debug information (logs) from
• Default setting: Restrict
Remote Service setting When "Allow" is selected, [Administrator] -> [Network] -> [Machine Update Settings]
-> [Machine Auto Update Settings] -> [Auto Update Settings for This Machine] will
not be displayed.
Web browser setting It will be displayed when "ON" is selected in [Administrator] -> [Network] -> [Web
change Browser Setting] -> [Web Browser Setting].
Maintenance Mode To "Allow" Maintenance Mode Access, set [Service Mode] -> [System 2] ->
Access [Maintenance Mode] to "Effective."
Write the Configuration -
from USB
Storage data backup • To set whether to permit our service representative to back up or restore the
• For details of the functions, refer to [Service Mode] -> [Enhanced Security] ->
Hide Personal If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON," disabling
Information (MIB) this setting cancels enhanced security mode.
Display Activity Log -
For details of the functions, refer to "
If "Restrict" is selected in [External Memory (Administrator)], [TPM Key Backup] is restricted in addition to the
functions that can be set in [ON]. Also, USB memory is not available for the following functions.
• [TX Operation Log Output], [Main Menu Display Settings], [License Settings], [Authorization function
Setting], [External Memory Backup - Export], [BootUp Screen]
For details of the functions, refer to "
It will be displayed when [Service Mode] -> [Billing Setting] -> [Management
Allowance Function Choice] shows that "Vendor 2" is mounted.
Network Function This setting is set to "OFF" when [Service Mode] -> [Billing Setting] -> [Management
Settings Function Choice] shows that "Vendor 2" or "Management Device 2" is mounted.
Exercise caution since it will stay in "OFF" setting even when "unset" is selected on
"Vendor 2" or "Management Device 2" setting in Service Mode later.
-
-
• This is displayed when Switch No. "63" is set to "01: Type 1" or "02: Type 2" in HEX Assignment in
[Service Mode] -> [System 2] -> [Software Switch Setting].
• For details of the functions, refer to "
For details of the functions, refer to "
-
To use this function, i-Option LK-115 v2 is required.
-
These are communication settings for the application which is developed by the third vendor. Do not set or
change these settings without vendor's instructions.
Function/Precondition
enabling this setting cancels enhanced security mode.
application is enabled.
browser extensions, [Allow] is automatically selected.
[Service Mode] -> [System 2] -> [Software Switch Setting].
the MFP to use the information to analyze problem in the MFP.
storage on this machine.
[Storage Data Backup].
H.12.3.5 Quick Security
H.12.3.2 Enhanced Security
H.12.3.3 Image Log Transfer
H.12.3.4 Driver Password Encryption
H-17
H UTILITY MODE > 6. Administrator
Setting."
Mode."
Settings."
Setting."
Service Manual