Olivetti d-Color MF4003 Service Manual page 261

d-Color MF4003/MF3303
Switch No.
188 Operation setting for print status LED
203 Setting to automatically change log-in authorization to a second user when the second user attempts card authentication
after a first user has been authenticated through card authentication.
206 Setting whether to enable Coverage Counter
226 HEX 10
HEX 80
227 Setting for the display of consumable level and warning. (Control panel, PSWC, Fiery)
230 HEX 08
HEX 40
10.5.1 SW No.012
• Addition of the authentication device
Bit Assignment
00000000
00000010
00000100
Reference
• [Service Mode] -> [Billing Settings] -> [Authentication Device 2]
10.5.2 SW No.025
• FW function version setting
Bit Assignment
00000000
00010000
Reference
• [Utility] -> [Device Information List]
10.5.3 SW No.033
• Renders some functions, which were available when both administrator authentication and key counter were provided with when using the
vendor, available only with administer authentication.
Bit Assignment
00000000
00000001
Reference
• [Utility] -> [Expert Adjustment]
• [Administrator] -> [System Settings] -> [List/Counter]
10.5.4 SW No.049
HEX 00 - HEX0A
• The upper limit of copies that can be input through the control panel of this machine is set.
Bit Assignment
00000000
00000001
00000010
00000011
00000100
00000101
00000110
00000111
00001000
00001001
00001010
HEX 80
• Scan setting only when Sort is selected for a copy cycle to be run with originals placed on the original glass.
Y119930-3
Setting for allowing/prohibiting use of fax mis-sending prevention function when line is used by TEL
terminal connection devices
Setting for allowing/prohibiting use of functions to allow administrator to change PBX function settings
when an external line button is added for direct input of an address with the PBX function enabled
Setting for the display of consumable level and warning. (PSES, MIB, Printfleet, SiteAudit)
Setting for allowing/prohibiting use of functions for preventing a unintentional sending to a wrong
destination
HEX Assignment
00 Standard
02 PKI (NIPRNet)
[Card3] choice is added in Service Mode.
04 PKI (SIPRNet)
[Card3] choice is added in Service Mode.
HEX Assignment
00 FW compatible with version 1.0
10 FW compatible with version 2.0
HEX Assignment
00 Available with the combination of administer authentication
and key counter.
01 Available only with administrator authentication.
HEX Assignment
00 Unlimited
01 1 copy
02 3 copies
03 5 copies
04 9 copies
05 10 copies
06 20 copies
07 30 copies
08 50 copies
09 99 copies
0A 250 copies
Function
Details
Details
Details
Details
I-45
I SERVICE MODE > 10. System 2
Default value (Bit/HEX)
00000000 / 00
Default value (Bit/HEX)
00010000/10
Default value (Bit/HEX)
00000000 / 00
Default value (Bit/HEX)
00000000 / 00
Service Manual