Table of Contents
Advertisement
Rexroth Frequency Converter EFC x610
Series
Cable and Connection
Please select CANopen cable type in accordance with the following instructions.
Max. cable
Baudrate
length
1,000 kbps
25m
500 kbps
100 m
250 kbps
250 m
125 kbps
500 m
50 kbps
1,000 m
20 kbps
1,000 m
10 kbps
1,000 m
Tab. 15-3: Cable data
It is not suitable to connect frequency converter with "flat cable" and other
unscreened cable types. With regards to the connection of the cable screen, it is
recommended to connect to the ground at both ends of the cable at every
CANopen slave node. Low impedance ground connection of high frequency
screen is very important. This can be achieved by connecting to the ground with
a cable clamp or a conductive cable device, such as converter shielding kit.
15.7.3 Multi-Ethernet Card
Multi-Ethernet Interface
Fig. 15-17: Multi-Ethernet RJ45 interface
Resistance
[mΩ/m]
<70
0.25...0.34 / AWG23...AWG22
< 60
0.34...0.6 / AWG22...AWG20
< 40
0.5...0.6 / AWG20
< 26
0.75...0.8 / AWG18
Cable cross section
[mm
2
/AWG]
R912005854_Edition 09 Bosch Rexroth AG
521/653
Accessories
Termination
resistor
120 Ω
Advertisement
Table of Contents
