Rexroth Frequency Converter EFC x610
Series
Fig. 12-127: Process data default configurations
The set of allowed functions codes for input and output process da-
ta is contained at [b8.61] and [b8.62] respectively. Maximum sup-
ported input and output process data length is 30 bytes, each.
Hence, as current supported process data function codes are all two
bytes in data length, maximum number of configurable function co-
des is 15.
Following the instructions of the EDS installation tool to import the file into
●
the RSLogix. See the item in below picture.
Fig. 12-128: Device catalog
Select MEP XFC and click "Create", then type Name and IP Address in the fol-
●
lowing interface.
Functions and Parameters
R912005854_Edition 09 Bosch Rexroth AG
411/653