Table of Contents
Advertisement
556/653
Rexroth Frequency Converter EFC x610
Series
Accessories
15.12 Shielding Connector
The shielding layer of shielded cables must be reliably connected to the shield-
ing terminals of the frequency converter. Accessories (connector and screws) for
shielded cable connection are available for the connection convenience.
Fig. 15-50: Shielded cable connection with accessories for B, C, D housing (FEAM03.2-001-
NN-NNNN)
Connection steps
Step 1: Place holes ① of the connector on the two screw holes inside of sym-
bols
and tighten two screws.
Step 2: Insert the shielded cables through component ② of the connector with
the shielding layer reliable contact with the metal.
Step 3: Tighten four screws of the accessories.
Bosch Rexroth AG R912005854_Edition 09
Advertisement
Table of Contents
