Table of Contents
Advertisement
Rexroth Frequency Converter EFC x610
Series
Extension Card Mounting
CAUTION
Do not mount the extension card when frequency converter is powered on, oth-
erwise it will cause damage to the extension card.
Fig. 15-19:
1. Remove 2-M3 screws ① on back of the extension card module.
2. Remove the front cover of the extension card module.
3. Insert one extension card into the card slot with the metal plate beside the
extension card terminals placed in ②.
4. Push the extension card to achieve a stable connection of connector ③ (on
the back side of the extension card) with connector ④ (on the extension
card module).
5. Mount the front cover of the extension card module.
6. Tighten 2-M3 screws ① of the extension card module.
7. Attach an appropriate terminal label on the label indentation ⑤ located at
the lower section of the front cover.
Risk of device damage!
R912005854_Edition 09 Bosch Rexroth AG
525/653
Accessories
Advertisement
Table of Contents
