Communication Parameter Configuration - Bosch rexroth EFC 610 Series Operating Instructions Manual

348/653
Functions and Parameters

Communication parameter configuration

Communication related parameter settings
Parameter
E0.00 First frequency setting source
E0.01 First run command source
E0.02 Second frequency setting source
E0.03 Second run command source
E8.00 Communication protocol
E8.03 Communication process data loss behavior
H0.12 Torque control reference from fieldbus
FWD torque limitation reference from field-
H0.14
bus
H0.15 REV torque limitation reference from fieldbus 4: Communication
Speed limitation at torque control mode from
H0.16
fieldbus
H1.00 PROFIBUS local address
H1.01 Present baud rate
H1.02 Present telegram type
Bosch Rexroth AG R912005854_Edition 09
Rexroth Frequency Converter EFC x610
Name Parameter settings
20: Communication
2: Communication
20: Communication
2: Communication
1: Extension card
Depends on parameter setting
6: Communication
4: Communication
4: Communication
Depends on parameter setting
(Read only)
Series
①
①