Rcm - Bosch rexroth EFC 610 Series Operating Instructions Manual

Rexroth Frequency Converter EFC x610 637/653
Series
Appendix

19.4.4 RCM

Frequency Converters EFC x610 (0K40...90K0) comply with the relevant ACMA
standards made under the Radiocommunications Act 1992 and the Telecommu-
nications Act 1997.These standards are referenced in notices made under sec-
tion 182 of the Radiocommunications Act and 407 of the Telecommunications
Act.
RCM label
Fig. 19-15: RCM label
RCM standard
EN 61800-3: 2004+A1: 2012, Adjustable speed electrical power drive systems -
Part3: EMC requirements and specific test methods
ACMA supplier code
E1066
CAN, ABN or ARBN
ABN / IRDN 89003258384
Category
Frequency Converters EFC x610 (0K40...90K0) complies with the applicable re-
quirements detailed in EN 61800-3: 2004+A1: 2012 (Category 3 limits) and is
not intended to be used directly on a low-voltage public network which supplies
domestic premises. Radio frequency interference is expected if used on such a
network, in which supplementary mitigation measures are required.
R912005854_Edition 09 Bosch Rexroth AG