Table of Contents
Advertisement
Rexroth Frequency Converter EFC x610
Series
System Configuration
GSD file
A GSD file which contains the setup information of IO device communication is
required when configuring the PROFINET IO controller.
Users can download the GSD file through the following steps:
1. Click on http://www.boschrexroth.com/dcc.
2. Choose "Frequency converter -> EFC 3610 (or EFC 5610)" from the naviga-
tion bar on left-hand side of the operation interface.
3. Choose "Download area" tab from right-hand side of the interface.
4. Click
on
xx.ZIP" to download the ZIP file.
5. Extract the ZIP file and get the GSD file.
"xxxx-xx-xx" indicates the date.
The following is the instruction of installing the GSD file on the Simatic Manager
software tool. It can be found in the hardware catalog.
Fig. 12-121: Hardware catalog
"DEVICE_DESCRIPTIONS_MULTI-ETHERNET_EFCX610_xxxx-xx-
Functions and Parameters
R912005854_Edition 09 Bosch Rexroth AG
403/653
Advertisement
Table of Contents
