Bosch rexroth EFC 610 Series Operating Instructions Manual page 272

238/653
Functions and Parameters
K5
Inactive
Active
Tab. 12-14: 1-wire control configuration
Detailed multi-speed information refer to
Simple PLC" on page
In 2-wire / 3-wire running control, check and ensure that the direc-
tion setting meets the requirement in the actual application. If the
direction command is changed when the frequency converter is run-
ning, [E0.18] 'direction change dead time' is active.
Bosch Rexroth AG R912005854_Edition 09
Status
Stop
Run
262.
Rexroth Frequency Converter EFC x610
chapter 12.11 "E3: Multi-Speed and
Series