Table of Contents
Advertisement
418/653
Rexroth Frequency Converter EFC x610
Series
Functions and Parameters
12.20.6 SERCOS III
Protocol Configuration
After the SERCOS III protocol is activated (H3.41 = S3), the unique device ad-
dress in the SERCOS III network must be set via parameter H3.23.
Fig. 12-138: Device address setting
Or the SERCOS address can be assigned within project from automatically cal-
culated topology index. The resulted address reflects in parameter H3.24.
Bosch Rexroth AG R912005854_Edition 09
Advertisement
Table of Contents
