Rexroth Frequency Converter EFC x610
Series
12.17.2 Extension Card Identification
This part is about the information that be transferred from option card to fre-
quency converter for user checking after the communication between frequency
converter and option card established.
Extension card interface version
H0.18 and H0.19 are read only parameters and will display the interface version
of the option card used in which slot.
Code
Name
Opt 1 active interface ver-
H0.18
sion
Opt 2 active interface ver-
H0.19
sion
Extension card type
H0.20 and H0.30 are read only parameters and will represent which type of card
is connected in which slot.
Code
Name
H0.20 Extension card 1 type
H0.30 Extension card 2 type
Extension card firmware version
H0.23 and H0.33 are read only parameters and will display the firmware version
of the option card used in which slot.
Code
Name
Extension card 1 firmware
H0.23
version
Extension card 2 firmware
H0.33
version
Setting range
-
-
Setting range
0: None
1: PROFIBUS card
2: CANopen card
3: MEP (Multi-Ethernet)
7: Encoder card
8: I/O card
9: Relay card
10: IO plus card
Setting range
-
-
R912005854_Edition 09 Bosch Rexroth AG
Functions and Parameters
Default
Unit
Step
-
-
0.01 Read
-
-
0.01 Read
Default
Unit
Step
-
-
0.01 Read
-
-
0.01 Read
Default
Unit
Step
-
-
0.01 Read
-
-
0.01 Read
331/653
Attri.
Attri.
Attri.