386/653
Functions and Parameters
Engineering Tools
For using the MEP extension card, an engineering connection from laptop / PC
to the EFC series frequency converter is necessary. Such a connection can be
established with using following methods:
Via Ethernet using IndraWorks Ds. In this case, the MEP can be browsed and
●
the IP address can be set.
Via USB using ConverterWorks or IndraWorks Ds. Plug the cable and connect.
●
The figure below shows an overview of ConverterWorks.
Fig. 12-118: Overview of ConverterWorks
Bosch Rexroth AG R912005854_Edition 09
Rexroth Frequency Converter EFC x610
Series