Example; Ethernet/Ip; Protocol Configuration - Bosch rexroth EFC 610 Series Operating Instructions Manual

408/653
Functions and Parameters
Group Index
F 0...9
H 0...9
Tab. 12-127: Parameter group mapping
An offset of 0x30 must be added on the parameter sub-index to form the record
index. For example, the record index of E0.26 Acceleration Time is:
0x3000 + 0x1A + 0x30 = 0x304A

Example

A simple program fragment example that utilizes the mapped I/Q addresses is
shown as below. The process data configuration is by defaults.
Fig. 12-126: Program example

12.20.5 EtherNet/IP

Protocol Configuration

The master communication address for EtherNet/IP is an IP address. It is set
manually in the frequency converter side by using an engineering tool. The pa-
rameter H3.06 can be set to enable the MEP in receiving IP address from a
DHCP server, see chapter 10.2.2.
Bosch Rexroth AG R912005854_Edition 09
Rexroth Frequency Converter EFC x610
Value
0x50...0x59
0x60...0x69
Example
F0: 0x50
H3: 0x63
Series