Table of Contents
Advertisement
Rexroth Frequency Converter EFC x610
Series
Fig. 12-52: Running at 0 Hz
For applications, in which the running frequency cannot be too low, define
the low limit frequency running mode when the output frequency is lower
than [E0.10] 'Output frequency low limit'.
[E0.15] = 1: Running with low limit frequency
●
Fig. 12-53: Run with low limit frequency
A hysteresis band is set by [E0.16]. If actual setting frequency is higher than
[E0.10] + [E0.16] again, the output frequency will accelerate from [E0.10] to
the setting frequency according to the actual acceleration time.
If [E0.10] < [E0.16], [E0.16] will be set as [E0.10] automatically.
Functions and Parameters
R912005854_Edition 09 Bosch Rexroth AG
205/653
Advertisement
Table of Contents
