Connection; Sequence Of Connections; Connecting Monitors; Establishing The Network Connection - Bosch VJD-8000 Installation Manual

14 en | Connection
5

Connection

5.1

Sequence of connections

Notice!
Do not connect the decoder to the power supply until all other connections have been made.
Otherwise the automatic assignment of the IP address will fail and a faulty monitor resolution
will be set. This may lead to serious damage of the unit.
5.2

Connecting monitors

You must connect a suitable monitor to the decoder. If mounting the unit to the back of a
monitor, use only monitors with standard VESA mount.
The unit provides two Mini DisplayPorts as monitor outputs which can be used at the same
time.
4
VGA connections are not supported.
5.3

Establishing the network connection

You must connect the decoder to a 10/100/1000 Base-T network using a standard UTP
category 5 cable with RJ45 plugs.
4
When the decoder is powered after finalizing all connections, the LEDs on the RJ45 socket
light up to indicate that the network connection has been set up correctly. Flashing green, the
left LED signals that data packages are being transmitted over the network.
See also
–
5.4

Connecting audio

The decoder has no dedicated audio port. Audio is transmitted digitally via monitor output
DP1. There is no audio transmission for monitor output DP2.
5.5

Connecting the power supply

Power is supplied via a separate power supply unit that is part of the delivery. It offers two
power cords, one for EU and one for US.
Notice!
Use only the power supply unit that is included, together with the suitable power cord.
Connect the unit to an earthed mains socket-outlet.
Do not connect the decoder to the power supply until all other connections have been made.
1.
2.
The unit is now ready for use.
2015.08 | V1 | DOC
Connect each monitor using the respective monitor cable or adapter.
Connect the unit to the network via the RJ45 socket.
LEDs, page 19
Connect the decoder to the power supply unit.
Select the suitable power cord and plug this into the power supply unit and then into the
mains.
Installation Manual
VIDEOJET decoder 8000
Bosch Security Systems B.V.