Table of Contents
Advertisement
Rexroth Frequency Converter EFC x610
Series
which measures of risk reduction for personal safety depend on electrical,
electronic or programmable control systems.
The information given in the application documentation with regard to the use
●
of the delivered components contains only examples of applications and sug-
gestions.
The machine and installation manufacturers must
– make sure that the delivered components are suited for their individual ap-
plication and check the information given in this application documentation
with regard to the use of the components,
– make sure that their individual application complies with the applicable
safety regulations and standards and carry out the required measures,
modifications and complements.
Commissioning of the delivered components is only allowed once it is sure
●
that the machine or installation in which the components are installed com-
plies with the national regulations, safety specifications and standards of the
application.
Disconnect the internal EMC filter when installing the drive on an IT system
●
(an ungrounded power system or a high-resistance-grounded [over 30 ohms]
power system), otherwise the system will be connected to ground potential
through the EMC filter capacitors. This may cause danger or damage the
drive. Disconnect the internal EMC filter when installing the drive on a corner-
grounded TN system, otherwise the drive will be damaged. When the internal
EMC filter is disconnected, the drive is not EMC compatible.
The technical data, connection and installation conditions of the components
●
are specified in the respective application documentations and must be fol-
lowed at all times.
National regulations which the user must take into account
European countries: In accordance with European EN standards
●
United States of America (USA):
●
– National Electrical Code (NEC)
– National Electrical Manufacturers Association (NEMA), as well as local engi-
neering regulations
– Regulations of the National Fire Protection Association (NFPA)
Canada: Canadian Standards Association (CSA)
●
Other countries:
●
– International Organization for Standardization (ISO)
– International Electrotechnical Commission (IEC)
Safety Instructions for Electric Drives and Controls
R912005854_Edition 09 Bosch Rexroth AG
5/653
Advertisement
Table of Contents
