Table of Contents
Advertisement
118/653
Functions and Parameters
12 Functions and Parameters
12.1 b0: Basic System
12.1.1 Access Authority Setting
This function is used to set parameters or read parameter settings in a fast way.
Five access modes are available with parameter b0.00.
Code
b0.00
Access authority setting
Setting range of b0.00:
0: Basic parameters
●
b0, d0, C0, E0, U0, U1, U2, -EP- are visible.
1: Standard parameters
●
– For EFC 5610, b0, d0, C0, C1, C2, C3, E0, E5, E8, U0, U1, U2, -EP- are visi-
ble.
– For EFC 3610, b0, d0, C0, C1, C2, E0, E5, E8, U0, U1, U2, -EP- are visible.
2: Advanced parameters
●
– For EFC 5610, b0, d0, C0, C1, C2, C3, E0, E1, E2, E3, E4, E5, E8, E9, H0,
H1, H2, H3, H4, H8, H9, U0, U1, U2, F0, -EP- are visible.
– For EFC 3610, b0, d0, C0, C1, C2, E0, E1, E2, E3, E4, E5, E8, E9, H0, H1,
H2, H3, H4, H8, H9, U0, U1, U2, F0, -EP- are visible.
3: Start-up parameters
●
b0, d0, -St-, -EP- are visible.
4: Modified parameters
●
– b0, d0, -PF-, -EP- are visible.
– -PF- group consists of only modified parameters which are different from
the default setting. Parameter settings can be modified directly in -PF-
group.
– If a parameter in -PF- group was changed back to its default setting is still
visible in -PF- group. It is invisible once the group has been exited and re-
accessed.
– Parameters b0.10, b0.11, b0.20, b0.21, C0.53, C1.01, E9.05...E9.07,
E9.10...E9.15, H8.87, H9.97 are excluded from this function.
– If -PF- group is accessed if no parameter is different from default the warn-
ing message noCP will be displayed for 1.5s, then it will fall back to group
selection screen.
Bosch Rexroth AG R912005854_Edition 09
Name
Setting range Default
Rexroth Frequency Converter EFC x610
0...4
0
Series
Unit
Step
Attri.
-
–
Run
Advertisement
Table of Contents
