Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Bosch VIDEOJET multi 4000
Summary of Contents for Bosch VIDEOJET multi 4000
- Page 1 VIDEOJET multi 4000 VJM-4016 Installation Manual...
-
Page 3: Table Of Contents
VIDEOJET multi 4000 Table of Contents | en Table of contents Safety Electric shock hazard Installation and operation Maintenance and repair Short information About this manual Conventions in this manual Intended use EU Directives Rating plate System overview Parts included... - Page 4 | Table of Contents VIDEOJET multi 4000 Technical data 10.1 Electrical 10.2 Mechanical 10.3 Environmental conditions 10.4 Standards 2014.02 | V1 | F.01U.298.750 Installation Manual Bosch Sicherheitssysteme GmbH...
-
Page 5: Safety
– If safe operation of the unit cannot be ensured, remove it from service and secure it to prevent unauthorized operation. In such cases, have the unit checked by Bosch Security Systems. Safe operation is no longer possible in the following cases: –... -
Page 6: Maintenance And Repair
| Safety VIDEOJET multi 4000 – When making connections, use only the cables supplied or use appropriate cables immune to electromagnetic interference. – Position and run all cables so that they are protected from damage, and provide adequate cable strain relief where needed. -
Page 7: Short Information
Intended use The VIDEOJET multi 4000 encoder transfers video, audio, and control signals over data networks (Ethernet LAN, Internet). The unit is intended for use with CCTV systems. Various functions can be triggered automatically by incorporating external alarm sensors. -
Page 8: System Overview
Overview of functions Network video server The VIDEOJET multi 4000 encoder is a compact network video server for 16 connected video sources. It is primarily designed for encoding video, audio and control data for transfer over an IP network. With its encoding in the H.264 format, the unit is ideally suited for making existing analog CCTV cameras IP-compatible and for remote access to digital VCRs and multiplexers. - Page 9 Using video management systems, this is also true for live audio. Viewing View the encoder video on a PC using a Web browser, in Bosch Video Management System, or integrate it into another video management system. By routing the IP video to a high- performance VIDEOJET decoder or to Monitor Wall, you can present the video with ultimate clarity.
- Page 10 | System overview VIDEOJET multi 4000 Summary The VIDEOJET multi 4000 encoder provides the following main functions: – Video, audio, and data transmission over IP data networks – Dual Streaming function for the encoder for simultaneous encoding with two individually definable profiles –...
-
Page 11: Connections, Controls And Displays
VIDEOJET multi 4000 System overview | en Connections, controls and displays 3.4.1 Front view Factory reset button to restore factory default settings LED ACTIVITY flashes during data transmission LED LINK lights up when the unit is connected to the network... -
Page 12: Rear View
| System overview VIDEOJET multi 4000 3.4.2 Rear view VIDEO IN 1 to VIDEO IN 16 video inputs BNC socket for connecting the video source ETH RJ45 socket for connecting to an Ethernet LAN (local network), 10/100/1000 MBit Base-T AUDIO IN audio connection (mono) 3.5 mm (1/8 in) stereo socket audio in for connecting two audio sources... -
Page 13: Installation
Installation | en Installation Preparations The VIDEOJET multi 4000 encoder is designed for installation in a switch cabinet. Mounting the unit in a 19-inch rack using the installation material supplied is a quick and easy operation. Please ensure the following installation conditions: –... - Page 14 | Installation VIDEOJET multi 4000 2014.02 | V1 | F.01U.298.750 Installation Manual Bosch Sicherheitssysteme GmbH...
-
Page 15: Connection
Connection Connecting cameras You can connect a maximum of 16 video sources to the VIDEOJET multi 4000 encoder. Any cameras and other video sources that produce a standard PAL or NTSC signal are suitable. Connect each of the cameras or other video sources to BNC sockets VIDEO IN 1 to VIDEO IN 16 using a video cable (75 ohm, BNC plug). -
Page 16: Establishing The Network Connection
| Connection VIDEOJET multi 4000 Establishing the network connection You can connect the unit to a 10/100/1000 Base-T network using a standard UTP category 5 cable with RJ45 plugs. Connect the unit to the network via the ETH socket. -
Page 17: Connecting Audio
VIDEOJET multi 4000 Connection | en Connecting audio The unit has two audio ports for audio line signals. The audio signals are transmitted two-way and in sync with the video signals. The following specifications should be complied with in all cases. -
Page 18: Connecting Alarm Inputs And Relay Output
| Connection VIDEOJET multi 4000 Connecting alarm inputs and relay output Notice! For correct connection of alarm inputs and relay outputs, observe the labelling on the unit. Alarm inputs The unit has 4 alarm inputs on the terminal block. The alarm inputs are used to connect to external alarm devices such as door contacts or sensors. -
Page 19: Creating A Serial Connection
Notice! For correct connection, observe the labelling on the unit. The bidirectional data interface is used to control units connected to the VIDEOJET multi 4000 encoder, such as a dome camera with a motorized lens. The connection supports the RS-232, RS-422, and RS-485 transmission standards. -
Page 20: Power On/Power Off
| Connection VIDEOJET multi 4000 Power on/power off Depending on the ordered product package, the unit is delivered together with a power cord. Notice! Use only a suitable power cord. Where necessary, use suitable facilities to ensure that the power supply is free of interference such as voltage surges, spikes or brownouts. -
Page 21: Configuration
Setup using Video Client For the current version of our Video Client management software, access your Bosch product catalog on the Internet. This program allows you to implement and set up the unit in the network quickly and conveniently. - Page 22 | Configuration VIDEOJET multi 4000 Additional parameters You can check and set additional parameters with the assistance of the Configuration Manager application in Video Client. You can find detailed information on this in the documentation for these applications. Note that the audio function is not activated by default. To use audio connections activate the corresponding setting when configuring the unit.
-
Page 23: Troubleshooting
Contact If you are unable to resolve a malfunction, please contact your supplier or systems integrator, or go directly to Bosch Security Systems Customer Service. The following tables are intended to help you identify the causes of malfunctions and correct them where possible. -
Page 24: Malfunctions With Iscsi Connections
Placeholder with a red JVM not installed on your Install Oracle JVM from the cross instead of the computer or not activated. Bosch product catalog on the ActiveX components. Internet. Web browser contains Active proxy server in network. Create a rule in the local empty fields. -
Page 25: Processor Load
VIDEOJET multi 4000 Troubleshooting | en STATUS LED Lights up: Startup in progress. Flashes: The unit is faulty, for example following failed firmware upload. CONNECT LED Lights up: The unit is switched on and startup completed. Flashes: Video connection active. -
Page 26: Copyrights
| Troubleshooting VIDEOJET multi 4000 The serial interface supports the RS-232, RS-422 and RS-485 transmission standards. The mode used depends on the current configuration. The pin assignment of the serial interface depends on the interface mode used: Contact RS-232 mode... -
Page 27: Maintenance
VIDEOJET multi 4000 Maintenance | en Maintenance Updates Firmware updates are carried out via our Video Client software or other management systems in use. Please refer to the relevant documentation. Factory reset You can use the factory reset button to restore the unit to its original settings. Any changes to the settings are overwritten by the factory defaults. -
Page 28: Decommissioning
| Decommissioning VIDEOJET multi 4000 Decommissioning Transfer VIDEOJET multi 4000 should only be passed on together with this installation manual. Disposal Your Bosch product is designed and manufactured with high-quality materials and components which can be recycled and reused. -
Page 29: Technical Data
VIDEOJET multi 4000 Technical data | en Technical data 10.1 Electrical Input voltage 100 to 240 V AC, 47 to 63 Hz Input current 0.32 to 0.15 A Power consumption 23 W max Connectors IEC 320 C14 10.2 Mechanical Dimensions (H × W ×D) 44 ×... - Page 30 | Technical data VIDEOJET multi 4000 Total delay 260 ms typical Dual Streaming Full performance and full frame rate on both streams for every video input channel Frame rate 1 to 25/30 ips (PAL/NTSC) Audio standards G.711, L16, AAC-LC Audio frequency rate G.711: 300 Hz to 3.4 kHz...
- Page 31 VIDEOJET multi 4000 Index | en Index Alarm, 12 Network, 16 Alarm input, 18 Network connection, 12, 20, 25 Audio connections, 12, 17 Operation, 5 Cameras, 15 Overview of functions, 8 Closing contact, 18 Conventions, 7 Parameters, 22 Pin assignment, 26...
- Page 34 Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Sicherheitssysteme GmbH, 2014...