Configuration; Setup; Setup Using Bosch Video Client - Bosch VJD-3000 Installation Manual

VIDEOJET decoder 3000
6

Configuration

6.1

Setup

Before you can operate the unit within your network, it must have a valid IP address for your
network and a compatible subnet mask.
Notice!
As a default DHCP is enabled in the unit's network settings.
With an active DHCP server in the network you must know the IP address assigned by the
DHCP server to operate the unit.
The following default address is preset at the factory: 192.168.0.1
The setup procedure is carried out via our Video Client software or other management
systems. All information regarding the configuration can be found in the relevant
documentation of the video management system in use.
6.2

Setup using Bosch Video Client

For the current version of our Video Client management software, access your Bosch product
catalog on the Internet. This program allows you to implement and set up the unit in the
network quickly and conveniently.
Installing the program
1.
2.
3.
4.
Configuring the unit
You can start Video Client immediately after installation.
1.
2.
3.
4.
Bosch Sicherheitssysteme GmbH
Download Video Client from the Bosch product catalog on the Internet.
Unzip the file.
Double-click the installer file.
Follow the instructions on the screen to complete the installation.
Double-click the
the application via the Start button and the Programs menu (path: Start/Programs/Bosch
Video Client/Bosch Video Client).
When the program is started for the first time, a wizard opens to help you detect and
configure devices on the network.
If the wizard does not start automatically, click
application. Then, click Configuration Wizard... on the Tools menu.
Follow the instructions given in the Configuration Wizard window.
icon on the desktop to start the program. Alternatively, start
Installation Manual
Configuration | en
to open the Configuration Manager
2013.08 | V3 | F.01U.281.923
21