Table of Contents
Advertisement
Bosch Rexroth AG
Operating Panel and Dust Cover
10.6 Digit Shifting Function for Modification of Parameter Values
VFC 3210 also provides the digit shifting function for modification of parameter
values. To activate this function, press '<Func> + <▲>' or '<Func> + <▼>' once
when the frequency converter is displaying a certain parameter value. After this
action, the unit digit of the value blinks.
To select the digit for modification, press the following button combinations.
Pressing '<Func> + <▲>' once: the blinking digit is shifted one digit leftwards.
●
Pressing '<Func> + <▼>' once: the blinking digit is shifted one digit right-
●
wards.
Example: [E0.07] = 35.40. The frequency is now displaying '35.40'.
If the value '35.40' needs to be modified to be 15.40, execute the following
steps.
Step 1: Pressing '<Func> + <▲>' or '<Func> + <▼>' once to activate the digit
●
function. '35.40' is displayed with the unit digit '5' blinking.
Step 2: Pressing '<Func> + <▲>' again to shift the blinking digit leftwards.
●
'35.40' is displayed with tens digit '3' blinking.
Step 3: Pressing <▼> twice to change the tens digit '3' to be '1'. '15.40' is dis-
●
played with tens digit '1' blinking.
Step 4: Pressing <Set> to save the modified parameter value '15.40'. The dis-
●
play returns back to an upper menu level to show the next parameter with
'E0.08' displayed.
The digit shifting function is only available for parameters with
●
values and unavailable for parameter with options.
Press <Func> button and do not release it until <▲> or <▼> button
●
has been pressed.
Press <▲> or <▼> button within 2 s if <Func> button is pressed.
●
Press <Func> button over 2 s without pressing any other button to
●
cancel the uncompleted setting with button combinations.
68/253
VFC 3210
DOK-RCON04-VFC3210****-IT01-EN-P
Advertisement
Table of Contents
