Show Logging - NETGEAR GSM7228PS Software Administration Manual

ProSafe 7000 Managed Switch Release 8.0.3

Show Logging

The example is shown as CLI commands and as a Web interface procedure.
CLI: Show Logging
(Netgear Switch Routing) #show logging
Logging Client Local Port
CLI Command Logging
Console Logging
Console Logging Severity Filter :
Buffered Logging
Syslog Logging
Log Messages Received
Log Messages Dropped
Log Messages Relayed
Log Messages Ignored
Web Interface: Show Logging
1. Configure the syslog.
a. From the main menu, select Monitoring > Logs > Sys Log Configuration.
b. In the Syslog Configuration, next to the Admin Status, select the Enable radio
button.
c. Click Apply.
2. Configure the command log.
: 514
: disabled
: disabled
alert
: enabled
: enabled
: 66
: 0
: 0
: 0
Chapter 17. Syslog | 295