ProSAFE M7100 Managed Switches
logging syslog
This command enables syslog logging. The <portid> parameter is an integer with a range of
1-65535.
Default
disabled
Format
logging syslog [port <portid>]
Mode
Global Config
no logging syslog
This command disables syslog logging.
Format
no logging syslog
Mode
Global Config
logging syslog source-interface
This command configures the syslog source-interface.
Format
logging syslog source-interface {<unit/slot/port> | {loopback
<loopback-id>} | {tunnel <tunnel-id>}}
Mode
Global Config
show logging
This command displays logging configuration information.
Format
show logging
Mode
Privileged EXEC
Term
Definition
Logging Client
The port on the collector/relay to which syslog messages are sent.
Local Port
CLI Command
Shows whether CLI Command logging is enabled.
Logging
Console Logging
Shows whether console logging is enabled.
Console Logging
The minimum severity to log to the console log. Messages with an equal or lower numerical
Severity Filter
severity are logged.
Buffered Logging Shows whether buffered logging is enabled.
Syslog Logging
Shows whether syslog logging is enabled.
Utility Commands
391