5.
Remove the Document Size Sensor(s) from the Sensor Cover
2
Remove the mounting screw and
remove the particular sensor.
1
Disconnect the connector.
Figure 2 Removing the Size Sensors from the Cover
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
(Figure
2).
6.
Remove the platen cover sensor and actuator
January 2016
4-189
(Figure
2
Unclip the platen cover sensor.
Figure 3 Removing the Platen Cover Sensor and Actuator
3).
3
Remove the actuator and
spring.
1
Disconnect the connector.
Repairs and Adjustments
REP 14.4