Xerox WorkCentre 4150 Service Manual page 525

Machine Dimensions and Installation Space Requirements
Table 1 shows the dimension of the machine and the installation space required for safe oper-
ation.
Machine width
Configuration (A) mm / inches
4150 (without finisher) 622 / 24.4
4150 (with finisher) 1005 / 39.5
4250/4260/4265 (without 621.7 / 24.5
finisher)
4250/4260/4265 (with fin- 1005 / 39.5
isher)
NOTE: The machine depth dimension does not include the stand stabilizing feet. The machine
with finisher dimensions includes the stacker tray.
Figure 1 Installation Plan
General Procedures and Information
GP 13
Table 1 Working space requirements
Machine depth Install width required
(B) mm / inches (C) mm / inches
490 / 19.2 1622 / 63.8
490 / 19.2 2005 / 78.9
511.3 / 20.1 1622 / 63.8
511.3 / 20.1 2005 / 78.9
Front
NOTE: The dimensions shown in
workspace around the machine. To acquire the minimum safety workspace it may be neces-
sary to move the machine within the area specified.
Figure 1 represents a plan view of a machine installation and is to be read in conjunction with
Table 1. The dimensions A and B outline a footprint of the machine within the boundary of safe
operation, dimensions C and D. The dimension E indicates the area required for airflow / work-
space at the rear of the machine.
Install depth required Install airflow / service workspace
(D) mm / inches
1490 / 58.6
1490 / 58.6
1516 / 59.6
1516 / 59.6
January 2016
6-40 WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/
Table 1 allow for a 1 metre (39.4 inches) minimum safety
(E) mm / inches
178 / 7
178 / 7
178 / 7
178 / 7