REP 9.6 Xerographic Module Connector (4265)
Parts List on
PL 4.15
Removal
NOTE: This procedure should only be performed on the 4265. For other machine models, refer
to the Table of Contents.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to General Disassembly Precautions,
1.
Remove the Main Drive Assembly
Repairs and Adjustments
REP 9.6
WARNING
WARNING
CAUTION
GP
(REP
4.3).
2.
Remove the Cover
10.
January 2016
4-144
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
(Figure
1).
2
Remove the Cover.
1
Remove the four mounting screws.
Figure 1 Removing the Cover