Xerox WorkCentre 4150 Service Manual page 401

3. Adjust the DADF side edge registration
2
To adjust registration, move the Docu-
ment Guide in the desired direction
prior to relocating it on the pinion gear.
Figure 2 Adjusting the DADF Side Edge Registration
4. Reassemble the input tray assembly, and return the machine to normal operation.
5. Power on the machine.
6. Use the DADF to make 10 copies of a document. Check the registration, refer to
Registration. If necessary, re-adjust the registration.
Repairs and Adjustments
ADJ 5.1
(Figure 2).
1
Lift the end of the Document
Guide requiring adjustment
away from the pinion gear.
Pinion Gear
ADJ 5.2 4250/4260 DADF Skew Adjustment
IQS 3
January 2016
4-200 WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/