10. Remove the front door assembly,
Figure
1
Remove 4 screws, then the front door
assembly.
Figure 3 Front door removal
Repairs and Adjustments
REP 14.1
3.
11. Remove the scanner assembly,
1
Lock the CCD module.
2
Remove 4 screws.
Replacement
1.
Replacement is the reverse of the removal procedure.
2.
If a new scanner assembly was installed, perform
January 2016
4-182
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
Figure
4.
3
Remove the scanner
assembly by lifting from the
front and sliding it toward
the rear.
Figure 4 Scanner removal
ADJ 14.1
Shading Adjustment.