Xerox WorkCentre 4150 Service Manual page 235

Do not remove the DADF while the DADF is lowered. In the lowered position the coun-
terbalance springs are compressed and can cause injury when released.
3. Remove the DADF, Figure 2. Place the DADF on a solid flat surface.
Figure 2 DADF removal
Repairs and Adjustments
REP 5.1
WARNING
2
Tilt the DADF forward
then remove.
1
Pull up the DADF.
4. Open the top cover assembly,
5. Remove the front cover, Figure
January 2016
4-34 WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
Figure 3.
1
Open the top cover assembly.
Figure 3 Top cover assembly
4.
1
Remove 1 screw.
2
Unclip the front cover, then
remove the front cover.
Figure 4 Front cover removal