Rep 14.7 Platen Pulley Assembly (4265) - Xerox WorkCentre 4150 Service Manual

REP 14.7 Platen Pulley Assembly (4265)

Parts List on PL 14.16
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Upper Platen by performing the first three steps of
ponents.
2. Remove the long timing belt from the Platen Pulley Assembly
2
Remove the belt from the two pul-
leys.
1
Press inward on the Platen Pulley
Assembly to release the belt tension.
Figure 1 Removing the Long Timing Belt
Repairs and Adjustments
REP 14.7
WARNING
(REP 14.4) Scanner Com-
(Figure 1).
3. Remove the Platen Pulley Assembly
2
Move the Pulley Assembly inward
slightly, then lift it out of the
machine.
Figure 2 Removing the Platen Pulley Assembly
Replacement
1. Reinstallation is the reverse of the Removal procedure.
January 2016
4-196 WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
(Figure 2)
1
Remove the spring.